Novus-RHT-WM-LCD Fugt og temperatur transmitter med display (8804000101)

Novus RHT-WM Fugt og Temp. transmitter, PID regulator, med display

1.975,00 DKKInkl. moms

På lager

På lager (kan bestilles som restordre)

Har du brug for hjælp?

Ring til os på 7020 2848
eller send os en mail

Fri fragt på ordrer
over 650 DKK

30 dages returret

40 års erfaring

Godkendt af fødevarestyrelsen

Smileyordning

Beskrivelse

Væg-monteret signal-transmitter med display for Relativ luftfugtighed og Temperatur.

-40° til +100°C
0 til 100% RH (ikke kondenserende)
4-20mA eller 0-10V udgang
Kræver 12-30V DC strømforsyning
Konfigureres via USB Interface
Gratis konfigurerings software
Høj nøjagtighed.
LCD Display

The Novus RHT Climate-WM transmitter includes a high precision and stability sensor for measuring temperature and relative humidity. They are microprocessed devices and therefore allow being entirely configured through an RS485 interface using the Modbus RTU commands. The DigiConfig allows the configuration of all transmitter features as well as its diagnostic procedure. The transmitter allows complete parameters configuration through the USB interface simulation of temperature and humidity forcing the retransmission signals or even diagnostics
through NXperience software.

The RHT Climate sensors are suitable for general use in HVAC applications monitoring or climate control of environments and environmental monitoring of industrial processes where robustness accuracy and connectivity are required.

With or without a wide backlight display and distinctive design the RHT Climate is a humidity and temperature transmitter that provides high precision and stability of measurements over a wide operation range it calculates in real time seven psychrometric properties all variables will be available by current or voltage retransmission or by RS485 Modbus RTU communication.

Versatile the device allows configuration of parameters simulation of temperature and humidity and generation of retransmission signal useful features for commissioning on field in fast and easy way through USB with NXperience or directly by the keyboard. The RHT Climate also has two digital alarm outputs and an embedded buzzer for sound alarm.

Yderligere info

Se databladet her

Tekniske specifikationer

Sensor Measurement Range: Temperature: -400 °C to 1000 °C (DM models)/ -400 °C to 600 °C (WM models) Relative Humidity: 0.0 to 100.0 %RH (non-condensing) Dew point: -900 °C a 1000 °C Measurement Resolution: Temperature: 01 °C 14 bits (65535 levels) Relative Humidity: 01 % 12 bits (4095 levels) Response Time: Temperature: up to 5 sec @ 25 °C with slow moving air (1 m/s) Relative Humidity:up to 4 sec @ 25 °C with slow moving air (1 m/s) Measurement Accuracy: Temperature: ±02 °C (0 °C to +60 °C) Relative Humidity:±18 %RH @ +23 °C (0 %RH to 90 %RH) Samplings Interval: 3 seconds Analog Outputs: Two 0-10 V or 4-20 mA outputs configurable by software or keyboard Display: Wide backlight LCD with three variables of 4 ½ digits Keys: 3 keys with tactile feedback for navigation and adjustment of parameters Alarms: Two digital outputs and one embedded buzzer Operating Temperature: -40 ° C to 60 ° C Connections: Internal terminals through cable glands Dimensions: 100.3 x 80.0 x 45.1 mm Enclosure: ABS+PC Protection Rating: Temperature: ±02 °C (0 °C to +60 °C) ±18 %RH @ +23 °C (0 %RH to 90 %RH) Power Supply: By USB: 4.75 Vdc to 5.25 Vdc By Connectors: 12 Vdc to 30 Vdc; maximum consumption 70mA +/- 10% @ 24Vdc Protection Rating: Sensor probe: IP30 Enclosure: IP65 Communication interfaces: USB type Micro-B 2.0 and RS485 (both in Modbus RTU) Programming: NXperience software for Windows through USB

Novus-RHT-WM-LCD Fugt og temperatur transmitter med display (8804000101)

Novus RHT-WM Fugt og Temp. transmitter, PID regulator, med display

Har du brug for hjælp?

Væg-monteret signal-transmitter med display for Relativ luftfugtighed og Temperatur.

Relaterede varer

Log ind