Fri fragt på ordrer
over 650 DKK
30 dages returret
40 års erfaring
Godkendt af fødevarestyrelsen
Smileyordning
Beskrivelse
Event, Count and State USB Data Logger with more than 1.000.000 recordings !
- Counter Event and State logger
- Accepts input voltage form 3 to 28V
- Volt free contact option
- Rising and falling edge triggering
- Connection via screw terminals
- USB interface for setup and download
This standalone data logger can record events (detecting an input and storing the time and date of occurrence) record state changes (similar to an ‘event’ but also recording when the input reverts back to normal) and count events (count the number of events that happen in a time period without any individual event time or date information). Up to 32510 events or 32510 state changes can be recorded.
Events and state changes can be triggered by either a rising edge (a voltage going from low to high) or falling edge (a voltage going from high to low). It is also possible to use volt free contacts. Instead of measuring an external voltage the data logger applies a voltage across the screw terminals and detects when the input closes (i.e. a relay or microswitch).
Fast logging rates allow event capturing at speeds of up to two times per second and state changes at speeds of up to five times per second. Event counting can operate at speeds of up to 100 times per second (when the LEDs are turned off). The user can easily set up the logger and download the stored data by plugging the data logger into a PC’s USB port and running the purpose designed software under Windows 2000 XP Vista & 7. Data can then be exported to other applications for evaluation.
The data logger is supplied complete with software measurement leads terminated with crocodile clips and a long-life lithium battery which allows logging for up to 1 year. Functionality of the unit is indicated by flashing red and green LEDs with an option to flash the red LED every time an event occurs
Tekniske specifikationer
*Depending on operating mode
** 40Hz maximum when event LED is enabled
Maximum Event/State Change Frequency | 2Hz |
Minimum time in State | 100ms |
Resolution Event /State Mode | 100ms* |
Maximum Count/Count Per Frequency | 100Hz** |
Input Voltage | 3 to 28V d.c. |
Operating Temperature Range | -35 to +80°C |
Battery Life | 1 Year* |
No. of Readings | 1.007.616 |
Dimensions | 98 x 26.8 x 26.8 mm |
Relaterede varer
WiFi Data logger high accuracy, with high accuracy temperature sensor, visual and audio alarm
WiFi temperatur datalogger med ekstern glycol sensor + alarm med lys og lyd.
I restordre
2.162,50 DKKInkl. moms
USB Data logger with 4-20 mA input
4-20mA USB-datalogger inkl. PC software
I restordre
681,25 DKKInkl. moms
WiFi Data logger with Dual connector for external TC probe
WiFi datalogger med 2 stk. Thermocouple indgange
På lager
2.706,25 DKKInkl. moms
WiFi based wireless alert unit with external temperature probe
Mini trådløs temperatur WiFi sensor. Sender advarsels e-mails.
På lager
425,00 DKKInkl. moms
Mini dataloggere for temperatur OG fugt ! Køl / frys / lager / .....
På lager
Fra 286,25 DKK
Inkl. moms
Pad-Thermometer with connector for external TC probe
Datalogger-Termometer med "Touch" skærm Inkl. PC software ...
I restordre
2.337,50 DKKInkl. moms
Mini dataloggere for køl / frys / lager / fragt / .... UDEN brug af software !
På lager
Fra 214,38 DKK
Inkl. moms
WiFi alarmenhed for serien af WiFi dataloggere
På lager
1.506,25 DKKInkl. moms