Fri fragt på ordrer
over 650 DKK
30 dages returret
40 års erfaring
Godkendt af fødevarestyrelsen
Smileyordning
Beskrivelse
Legionnaires or Legionella thermometer kit – Incorrect water temperature is a key risk factor for legionella growth. The legionella bacteria multiply in water at temperatures between 20 to 45°C particularly if a supply of nutrients is present such as scale rust sludge or algae. A typical method of control is to store cold water below 20°C. Hot water should be stored above 60°C and distributed at above 50°C.
This thermometer kit can be used to monitor the temperature of both standing water and the surface of pipes and tanks that form part of the water system.
The immersion probe should be placed in the water to a minimum depth of 25mm; the ribbon surface probe may be used to take the temperature of pipes and tanks and the wire probe can be used to reach awkward places or where the other probes are not appropriate. This kit comes with a traceable certificate of calibration.
Current legislation means that if you are the employer or person in control of premises you must organise a risk assessment. The revised Approved Code of Practice (ACOP) issued by the Government’s Health and Safety Executive (HSE) significantly extends the scope of its guidance on control of legionella bacteria in water.
The code now applies to all hot and cold water systems in the workplace regardless of their capacity i.e. the lower limit of 300 litres previously used to exclude domestic systems no longer applies. Whilst domestic systems may represent a risk the code only applies to risk arising from a work activity.
This means that all employers who manage premises with hot/cold water systems and/or a wet cooling system have a legal responsibility to identify any risk of contamination and to prevent or control it.
Each Legionella thermometer kit contains:
1 x 221-041 Therma 1 thermometer
1 x 123-160 penetration probe
1 x 123-030 precision ribbon sufrace probe
1 x 133-362 PTFE wire probe
1 x 806-150 countdown timer
1 x 836-022 mini tub of 70 Probe-Wipes
1 x 834-150 ABS carrying case
For a full specification on the Therma 1 thermometer click here!
Relaterede varer
Type K, glass fibre exposed junction wire probe Ø1,5 x 1000 mm
ETI-133-382 (1 m), ETI-133-383 (2 m).
På lager
Fra 156,25 DKK
Inkl. moms
Rør-klemme temperaturprobe. Thermocouple Type K
På lager
281,25 DKKInkl. moms
Robust indstiksprobe, Thermocouple Type K (-75 til +250°C)
2 probe længder: ETI-133-120 (300 mm) og ETI-133-126 (100 mm).
På lager
Fra 543,75 DKK
Inkl. moms
Thermapen + Infrarødt termometer i samme enhed inkl. kalibreringscertifikat.
På lager
975,00 DKKInkl. moms
Robust ledningssensor probe med blottet målepunkt (-75 til 250°C). Thermocouple Type-K
ETI-133-372 (1 m), ETI-133-373 (2 m).
I restordre
Fra 175,00 DKK
Inkl. moms
K-Type rolling surface probe PTFE wheels 50 x 45 mm, 1 meter lead
Rulle overfladeprobe. Thermocouple Type K
I restordre
1.700,00 DKKInkl. moms
Skrue-formet probe med T-formet håndtag. Ø8 x 100 mm. Thermocouple Type K
På lager
1.031,25 DKKInkl. moms
Miniature nåle-probe Ø1,4 x 50 mm (-75°C til 250°C), Thermocouple Type-K.
ETI-133-180 (1 m), ETI-133-182 (2 m).
I restordre
Fra 525,00 DKK
Inkl. moms